Upgrade the Firmware – How to Upgrade MM712 Firmware?

IMPORTANT

Please charge your mouse for at least 2 hours before using for the first time to ensure optimal battery usage.

To ensure optimal use of the MM712, please download the MasterPlus+ software from https://masterplus.coolermaster.com/ and update the latest firmware.

NOTE: To update the MM712 FW to the latest version, please connect the MM712 in 2.4 GHz Mode and make sure the dongle is plugged into the PC.

 

STEP 1

Make sure the dongle is plugged into the PC, and the MM712 is connected in 2.4 GHz mode.

 

STEP 2

Open the MasterPlus+ software, it will automatically read the current FW version of the MM712 and popup to tell you to update the FW.

Press “Install” to update the firmware.

 

STEP 3

When the firmware update window pops out, click “OK” or press Enter key to start the update.

 

STEP 4

Starting the MM712 mouse firmware update process

 

STEP 5

When the mouse FW is updated, it will start the dongle FW update process and update automatically.

 

STEP 6

After both the MM712 and dongle firmware setup is complete, the MM712 is fully updated and ready for normal use.

 

STEP 7

Press “OK” to exit firmware update process and start to use your MM712.

 

IF THE MM712 IS CONNECTED IN WIRED MODE

Toggle the switch to Wired mode and the plug the cable into the PC. Then open the MasterPlus+ software, it will automatically read the current FW version of the MM712 and pop out to tell you to update the FW, but you CANNOT update the FW in Wired mode.

Please do not close the firmware update window and follow the instructions show on windows to update the firmware again.

 

STEP 1

Toggle the bottom switch to 2.4 GHz mode

 

STEP 2

Unplug the USB cable

 

STEP 3

Plug the dongle into your PC and make sure the MM712 is connected in 2.4 GHz mode.

 

STEP 4

When the firmware update window pops out, click “OK” or press Enter key to start the update. Please make sure to follow the instructions through the whole updating process.

 

STEP 5

After both the MM712 and dongle firmware setup is complete, the MM712 is fully updated and ready for normal use.